Daniels Lab Wiki

It is worth noting that.

Benutzer-Werkzeuge

Webseiten-Werkzeuge


projekte:banana-pro:install-armbian-to-a-sata-drive

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
projekte:banana-pro:install-armbian-to-a-sata-drive [2016/03/10 02:37] danielprojekte:banana-pro:install-armbian-to-a-sata-drive [2016/04/27 10:33] (aktuell) – [Automatic installation with nand-sata-install] daniel
Zeile 1: Zeile 1:
 ====== Install Armbian to a SATA drive ====== ====== Install Armbian to a SATA drive ======
 +
 +===== Automatic installation with nand-sata-install =====
 +
 +<code bash>
 +sudo nand-sata-install
 +</code>
 +
 +The installer seems to optimize the harddrive settings in /etc/fstab for ssd's and flash drives. For traditional harddrives i modified the settings and turned on the filesystem check. [[projekte:banana-pro:install-armbian-to-a-sata-drive#editingetcfstab_and_installing_smartmontools|Editing fstab and installing smartmontools]]
 +===== Manual installation steps =====
 +
 +This guide might not be up to date. Check the other sources as well if you run into troubles.
  
 Sources:\\ Sources:\\
Zeile 6: Zeile 17:
 [[https://blog.doenselmann.com/banana-pi-mit-ssd-hdd-betreiben/]] [[https://blog.doenselmann.com/banana-pi-mit-ssd-hdd-betreiben/]]
  
-<code bash>+<code bash sata.sh>
 # switch to su # switch to su
 sudo su sudo su
Zeile 50: Zeile 61:
 # reboot system # reboot system
 reboot reboot
- 
 </code> </code>
  
 +===== Editing /etc/fstab and installing smartmontools =====
 +
 +<code bash>
 +
 +# modify /etc/fstab settings for /dev/sda1
 +sudo nano /etc/fstab
 +
 +# change line
 +#/dev/sda1      /           ext4    defaults,noatime,nodiratime,commit=600,errors=remount-ro        0       0
 +# to this
 +/dev/sda1       /           ext4    defaults,errors=remount-ro        0       1
 +# Set the sixth field (fs_passno) from 0 to 1 or fsck will not check this drive 
 +
 +# install tune2fs to modify the filesystem parameters
 +sudo tune2fs -l /dev/sda1
 +# check filesystem every 10 mounts
 +sudo tune2fs -c 10 /dev/sda1
 +# check filesystem after 7 days
 +sudo tune2fs -i 7d /dev/sda1
 +
 +sudo reboot
 +
 +# install smartmontools to monitor the drive S.M.A.R.T. data
 +sudo apt-get install smartmontools
 +
 +#smartctl --info /dev/sda
 +#smartctl -P show /dev/sda
 +#smartctl --help
 +#smartctl -H /dev/sda
 +#smartctl -a /dev/sda
 +</code>
  
projekte/banana-pro/install-armbian-to-a-sata-drive.txt · Zuletzt geändert: 2016/04/27 10:33 von daniel

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki