Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- projekte:banana-pro:install-armbian-to-a-sata-drive [2016/04/17 23:59] – daniel
+++ projekte:banana-pro:install-armbian-to-a-sata-drive [2016/04/27 10:33] (aktuell) – [Automatic installation with nand-sata-install] daniel
@@ Zeile 1: / Zeile 1: @@
 ====== Install Armbian to a SATA drive ======
+===== Automatic installation with nand-sata-install =====
+<code bash>
+sudo nand-sata-install
+</code>
+The installer seems to optimize the harddrive settings in /etc/fstab for ssd's and flash drives. For traditional harddrives i modified the settings and turned on the filesystem check. [[projekte:banana-pro:install-armbian-to-a-sata-drive#editingetcfstab_and_installing_smartmontools|Editing fstab and installing smartmontools]]
+===== Manual installation steps =====
+This guide might not be up to date. Check the other sources as well if you run into troubles.
 Sources:\\
@@ Zeile 50: / Zeile 61: @@
 # reboot system
 reboot
 </code>
+===== Editing /etc/fstab and installing smartmontools =====
+<code bash>
+# modify /etc/fstab settings for /dev/sda1
+sudo nano /etc/fstab
+# change line
+#/dev/sda1      /           ext4    defaults,noatime,nodiratime,commit=600,errors=remount-ro        0       0
+# to this
+/dev/sda1       /           ext4    defaults,errors=remount-ro        0       1
+# Set the sixth field (fs_passno) from 0 to 1 or fsck will not check this drive
+# install tune2fs to modify the filesystem parameters
+sudo tune2fs -l /dev/sda1
+# check filesystem every 10 mounts
+sudo tune2fs -c 10 /dev/sda1
+# check filesystem after 7 days
+sudo tune2fs -i 7d /dev/sda1
+sudo reboot
+# install smartmontools to monitor the drive S.M.A.R.T. data
+sudo apt-get install smartmontools
+#smartctl --info /dev/sda
+#smartctl -P show /dev/sda
+#smartctl --help
+#smartctl -H /dev/sda
+#smartctl -a /dev/sda
+</code>