Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- projekte:banana-pro:install-armbian-to-a-sata-drive [2016/03/10 02:17] – daniel
+++ projekte:banana-pro:install-armbian-to-a-sata-drive [2016/04/19 01:51] – daniel
@@ Zeile 1: / Zeile 1: @@
 ====== Install Armbian to a SATA drive ======
+===== Automatic installation with nand-sata-install =====
+<code bash>
+sudo nand-sata-install
+</code>
+===== Manual installation steps =====
+This guide might not be up to date. Check the other sources as well if you run into troubles.
 Sources:\\
@@ Zeile 6: / Zeile 16: @@
 [[https://blog.doenselmann.com/banana-pi-mit-ssd-hdd-betreiben/]]
-<code bash>
+<code bash sata.sh>
+# switch to su
 sudo su
@@ Zeile 30: / Zeile 41: @@
 rsync -arx --progress / /tmp/sata
+# edit boot.cmd
+mount /dev/mmcblk0p1 /boot
+nano /boot/boot/boot.cmd
+# change first line from root=/dev/mmcblk0p1 to root=/dev/sda1
+setenv bootargs "console=tty1 root=/dev/sda1 rootwait rootfstype=ext4 cgroup-enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1"
+# save and close file
+# recompile boot.cmd to boot.scr
+mkimage -C none -A arm -T script -d /boot/boot/boot.cmd /boot/boot/boot.scr
+# edit fstab to mount drive on boot
+nano /tmp/sata/etc/fstab
+# set line with /dev/mmcblk0p1 to
+/dev/sda1	/           ext4    defaults,noatime,nodiratime,data=writeback,commit=600,errors=remount-rw        0       0
+# sync changes on harddrive to sd card
+sync
+# or edit the fstab file on the sd card as well: nano /etc/fstab
+# reboot system
+reboot
 </code>